Digital clamp multimeter/tester

This relay fits in line in the vehicle's rear fog light circuit and switches off the vehicle fog light(s) when a trailer is connected.

M16 x 40mm Bolt Only

M8 plain hexagonal nuts. Use for attaching a terminal to the bolt of a battery clamp

Alloy 7 pin trailer 12N lighting socket with screw terminals to accept the trailer 7-core cable.

Rubber grommet to protect cable passing through a 9/16" (12mm) hole. For grey 12S cable

Double FuseTap Micro3 : New micro-size, 15 amp fuse tap power pickup: piggy backs where there is an existing fuse or takes fused power from an empty chamber.

Uprated trailer lighting cable, with 7 internal cores, 6 cores rated approximately 6 amps and one core rated approximately 10 amps, 100m roll.

30mm yellow blade fuse puller tool that makes it easier to remove blade fuses.

DC Voltage and resistance probe. Has a needle probe, built in torch and earth clamp. LCD display indicate voltage at any point probed: up to 110V DC, resitance and On/Off state.

Supplied with protective travel case.