(OUT OF STOCK UNTIL 05/01/25)
In the low sun seasons, drivers can struggle to see well on bright sunny days.
These simple pull-down sun visor extenders can seem like a life-saver at times and we have used them since we first introduced them ten years ago.
This year we have upgraded them. Now they are white and decorated with original art by Jo Surridge
The pictures are visible through the windscreen. Elegant and enhancing in appearance, they make your car stand out.
They are very simple to install – they fit in seconds- and they stay put behind the visor, always there when you need them.
There are four designs, Badger, Deer, Grouse and Pheasant and they are sold in pairs.
Please select the pairs you want from the drop-down boxes below
VAT
For caravans with a lever type door retainer.
This add on release cable alows you to release the caravan door from the anti-slam securing device without having to lean around or step outside.
(patent pending)
VAT
For caravans with a snap or magnetic type door retainer.
This add on pnumatic device alows you to release the caravan door from the anti-slam securing device without having to lean around or step outside.
(patent pending)
VAT
For caravans with wind affected Heki rooflights.
This easy to install ajustable bar inserts into the guide grooves of the rooflight to stop the rooflight from being blown fully open or slammed shut on windy days which can cause damage to the rooflight.
(patent pending)
VAT
The Hard Ground Peg Puller is designed to overcome the problem of pulling up hard ground tent and awning pegs that are securely fixed into hard standings or other hard ground.
The claw is wide and fits comfortably under the bulky heads of hard ground pegs, the long lever arm provides a good lift and also means you don’t have to stoop low to use it.
VAT
Ultrasonic reversing sensors built into a EU numberplate shroud with wireless in car dashboard monitor, A cost effective and easy to install auxiliary reversing warning device which can help prevent damage to vehicles, caravans and trailers when reversing.
(If installed externally on a trailer, it is recomended to install control module in a waterproof box)
VAT
24V Sealed bypass with long input and output leads. For tippers, etc. Puts no load on the vehicle light circuits. Compatible with most vehicles including PWM systems.
VAT
TF2323 SmartCAN2 Kit is a vehicle-specific 12N CANbus-controlled trailer interface fitting kit
This kit has everything you need for a 13pin installation to operate the trailer road lights.
For caravan 12S power and split charging please use the TF2324 kit.
When ordering, please specify the car you are fitting
The list of compatible vehicles is below, under More Information.
VAT
TF2324 SmartCAN2 kit is a vehicle-specific 12N/12S CANbus-controlled trailer/caravan interface kit. It controls the trailer or caravan road lights and has caravan 12S functionality.
This kit has everything you need for a 13pin installation with CAN controlled caravan power and battery charging.
It is ideal for smart alternator vehicles.
When ordering, please specify the car you are fitting.
The list of compatible vehicles is below under More Information.
VAT
3.5 ton Ball and Pin Black Towball, type approved 50mm (S=350kg D=20Kn)
VAT
ATO size blade type fuses, 120 piece multi box.
20 x 5A fuses
20 x 10A fuses
20 x 15A fuses
20 x 20A fuses
20 x 25A fuses
20 x 30A fuses
VAT
Manually resetable 15 amp blade fuse, ATO size. Blue
VAT
Mini size blade type fuses, 120 piece multi box with fuse removal tool.
20 x 5A fuses
20 x 10A fuses
20 x 15A fuses
20 x 20A fuses
20 x 25A fuses
20 x 30A fuses
VAT